If you do it the right way, there is some pleasure on earth better than a hot shower in the glass-encased shower stall. Of course, there is one thing that better than that – a hot shower in the shower stall is encased in glass that you put on their own.
Installation of shower doors, for DIY enthusiasts, can be a very entertaining project to take on. It is not difficult, but it involves skill, patience, use the right tools and results that can only look amazing. You can also hire professionals for glass shower door fitting for your bathroom.
The first thing you need to do is to cut off the path. You need to carefully measure the area inside the bathroom door, and use the measurements to cut the track. You can use a chainsaw to hack it. If you want a straight edge, a miter box would be a good idea.
You need to temporarily hold the track in place now. You need to put them in the tub or shower area and then hold it in place with tape. Look for the side rails and sliding them in place. You can use the vertical level to make sure that things are level.
Now you need to mount the jambs on either side of the curb. First mark the holes where they will go, and then remove the jambs and everything. You have to hold a heavy tool now.
Getting a 3/16 inch bit for your drill capable of cutting to smooth surfaces such as tile, and drill away. You just need to get the plastic holder or holders' nail wall to be able to hold the screw now.
You can now apply dormant on the track, and make sure that it is installed in place. Do make sure that you have installed them in the right way. The weep holes should be inside.